Comments on: Part Numbers https://jti.uk.com Wed, 19 Aug 2026 15:26:49 +0000 hourly 1 By: Tim https://jti.uk.com/toucan/parts/#comment-796 Sun, 05 Oct 2014 10:30:31 +0000 https://jti.dsmynas.net/wordpress/?page_id=1416#comment-796 V1.40 did not seem to sort this issue and further investigation revealed that the CAN definitions for the Syvecs were not 100% correct.

Grabbing the file from the downloads section of this site and applying it to the CAL – problem solved 🙂

]]> By: Tim https://jti.uk.com/toucan/parts/#comment-794 Thu, 02 Oct 2014 08:54:53 +0000 https://jti.dsmynas.net/wordpress/?page_id=1416#comment-794 In reply to paul.

There have been some issues with LC indication with it getting broken, then fixed, then broken again, in versions between V1.30 and V1.35. There is a new version V1.40 available that – we hope! – puts this issue to bed.

]]> By: paul https://jti.uk.com/toucan/parts/#comment-793 Wed, 01 Oct 2014 21:45:45 +0000 https://jti.dsmynas.net/wordpress/?page_id=1416#comment-793 Hi, I brought My New Age Impreza a month ago that is running a syvecs ecu and toucan installed with firmware 1.34 installed. I had the car remapped the other week by Simon at Jolly Green Monster and is running great. The problem I have is the LC indicator on the toucan does not know that LC is enabled. The LC indicator does not turn green. Everything else seems to be working on the toucan e.g. the gauges and AL button etc. The LC enables when the car is stand still and then de-activates at 10kmh. I have read the manuals but can’t find any info in regards to what actually tells the Toucan that LC is enabled and what to check. If someone could give me some advice please, then that would help a lot.

]]>