User Guides, Firmware and Software

Toucan Firmware

V1.72 Adds support for SimTek2 (GEMS) ecu. Adds turbo speed and NOS pressure gauges, gear indicator increased to show gears up to 9, minor bug fixes.

Note – from March 2016, a new version of Toucan hardware was introduced – the correct binary file must be used for each version and you MUST use the latest Toucan programmer from this page.

The hardware version number will be reported via the latest Toucan programmer when you first connect the toucan via USB.

PLEASE use the right file!

V1.72 for Hardware versions up to 3

V1.72 for Hardware versions 4 and above

Toucan Programming Software – allows new firmware to be applied to the Toucan display. Existing installations should automatically update to this version when you run the software and are connected to the Internet. Only the latest version will auto detect if the incorrectly matched firmware is used.

Toucan Programming Software User Guide

V1.50 Adds support for the JTi shiftlight.

 

Documentation

Current Toucan User Guides

Toucan Installation and User Guide V1.51 (Syvecs version, for firmware V1.50 and newer)

Toucan Installation and User Guide (Link/Vi-PEC version, for firmware V1.40 and newer)

Toucan Installation and User Guide (MoTeC version, for firmware V1.30 and newer)

Toucan Installation and User Guide (AlcaTek version, for firmware V1.30 and newer)

Older Toucan User Guides

Toucan Installation and User Guide (Syvecs version, for firmware V1.20 and newer)

Toucan Installation and User Guide (AlcaTek version, for firmware V1.20 and newer)

Toucan Installation and User Guide (Syvecs version, for firmware pre V1.20)

ShiftLight User Guide

ShiftLight User Guide

Mini-Expansion Unit User Guide

Mini Expansion Unit Installation and User Guide

Sensor Information

Sensor Datasheet

Link/Vi-PEC CAN Stream Definition File

Link/Vi-PEC CANbus Definition File

Syvecs Files

Toucan CANbus Calibration File (for Toucan version V1.30 onwards)

Sensor Linearisation files – for the sensors available from us. Download and extract the files from the “zip”. Save them in the “SensorDB” folder, usually located at “C:\Program Files (x86)\Syvecs\SensorDB”, or similar.

MEU Sensor Linearisation files – for the in-built sensors of the Mini Expansion Unit. Download and extract the files from the “zip”. Save them in the “SensorDB” folder, usually located at “C:\Program Files (x86)\Syvecs\SensorDB”, or similar.

Software

Shiftlight Programming Software – allows the shiftlight unit to be configured from your PC (not needed if the shiftlight is connected to a Toucan unit. (NB. May have issues with Windows XP)

Toucan Programming Software – allows new firmware to be applied to the Toucan display unit

MEU Programming Software – allows new firmware to be applied to the Mini Expansion Unit.

Toucan Programming Software User Guide