Part Numbers
This is a list of parts most commonly asked about. Unfortunately we cannot supply any of them now, but by searching the web you can hopefully find a supplier. This list will be added to over time.
Toucan
NB. The terminals are small and really need the proper crimp tool, although some have reported success using a small-jawed, generic crimp tool
| 12 Way Main connector | Molex 502439-1200 |
| 6 way connector (shiftlight) | Molex 502439-0600 |
| Terminals for the above | Molex 5024380000 |
Hi, I brought My New Age Impreza a month ago that is running a syvecs ecu and toucan installed with firmware 1.34 installed. I had the car remapped the other week by Simon at Jolly Green Monster and is running great. The problem I have is the LC indicator on the toucan does not know that LC is enabled. The LC indicator does not turn green. Everything else seems to be working on the toucan e.g. the gauges and AL button etc. The LC enables when the car is stand still and then de-activates at 10kmh. I have read the manuals but can’t find any info in regards to what actually tells the Toucan that LC is enabled and what to check. If someone could give me some advice please, then that would help a lot.
There have been some issues with LC indication with it getting broken, then fixed, then broken again, in versions between V1.30 and V1.35. There is a new version V1.40 available that – we hope! – puts this issue to bed.
V1.40 did not seem to sort this issue and further investigation revealed that the CAN definitions for the Syvecs were not 100% correct.
Grabbing the file from the downloads section of this site and applying it to the CAL – problem solved 🙂